Dragon Marine Systems
  • Home
  • Panels
  • Wiring Looms
  • Support
    • About Us
    • Contact Us
    • Ask DMS (Q&A + Support) >
      • Alternator and Sensors INFO
    • Warranty and fitting >
      • D.m.s Safety
      • ​System Integration
      • Fitting And Cautions
    • FAQ's
  • Home
  • Panels
  • Wiring Looms
  • Support
    • About Us
    • Contact Us
    • Ask DMS (Q&A + Support) >
      • Alternator and Sensors INFO
    • Warranty and fitting >
      • D.m.s Safety
      • ​System Integration
      • Fitting And Cautions
    • FAQ's
Search by typing & pressing enter

YOUR CART

29/6/2018 1 Comment

Will a single sensor drive a gauge at the helm and on the fly bridge.

Dave,

Just want to confirm they are Duel sensors, I have to connect 2 gauges to each sensor, this is a Oil & WT gauge located at the bottom helm station as well as the fly bridge Helm station


You can see on the sensor below that there are two inputs. One is for a gauge one is for a warning light. So it is doing two different jobs in one sensor. The warning light part is a simple switch, in this case it will switch at 98C + or - 3C. When the switch is open the light is on.
The other pole is for the gauge and dose a different job. This pole senses temp and gives a known resistance depending on temperature.
This resistance is what your gauges are measuring.

So do you connect one gauge to each tab - no.
Will two gauges work off a single sensor? Yes should do in the worst case you can use a switch-over relay at the fly bridge for when you are up there.
Picture
1 Comment

29/6/2018 0 Comments

Will a sensor go with my Temp/Fuel / Pressure gauge?

All gauges and sensors work in the same way - however they are not all compatible.
Each sensor is designed to 'sense' a value range and send a value to its gauge in OHMS. 
So they all do the same thing - in the same way - however each manufacturer makes their gauges and sensors with their own set of values. There is not industry standard.
When you purchase a gauge it will have information on the operating range and THE INPUT RANGE. 
When you purchase your sensor you need a matching set of operating and input range or the gauge will not function correctly.
The best way to be sure is to purchase both gauge and sensor from the same place.

Picture
Picture
Picture

0 Comments

    Author

    The purpose of this blog is to help. Please ask your questions and give your feedback and observations.

    Archives

    October 2019
    May 2019
    February 2019
    October 2018
    September 2018
    June 2018
    May 2018
    March 2018
    February 2018

    Categories

    All Fuel Tank Fuse & Relay Gauges Starting Pre Heat & Prime Starting Pre-Heat & Prime Wiring

    RSS Feed

    View my profile on LinkedIn
ENQUIRIES
DMS
Email: [email protected]
Telephone: +447513 844841