Volvo Penta Standard Instrument Panel
This is a Volvo Penta standard control panel.
This aftermarket panel has been made to connect directly to your original Volvo Penta wiring loom or Volvo Penta engine wiring harness.
The panel will work with all your original equipment engine sensors and is a simple plug and play fitting job.
Panel Specification:
Fascia;
180 x 140mm.
Rustproof.
Does not fade.
Easy to clean.
Gauges;
Voltmeter.
4000 rpm Tachometer with hours.
Fully waterproof.
Stainless Steel bezel
Will not yellow or crack in the sun.
Warning Lights;
Low oil pressure with buzzer.
High water temperature with buzzer.
Alternator charge light.
Switches;
Waterproof Key switch: STOP, ON, HEAT, START.
Fitting:
Simply remove the old panel and plug in the new panel.
Secure the panel to the bulkhead with the fixing screws.
(If outside) Use gasket provided or gasket sealant between the panel and the bulkhead.
What you get in the box:
1.) - 1 x Standard instrument panel.
2.) - 1 x Gasket.
3.) - 4 x Fixing screws.
4.) - 2 x Keys with Float.
5.) - Manuals for Tachometer and Voltmeter.
6.) - Thank you note.
7.) - Customer service helpline contact information.
Designed to replace all Volvo Penta Panels with, or without a key switch.
If you have any questions please contact us.
- Waterproof Key Switch
- Waterproof Stop Button
- "Low" Oil Pressure Warning Light
- "High" Water Temperature Warning Light
- Battery Charge Warning light
- Tachometer (Programable To Different Alternators)
- Voltmeter With Red Backlight - To Help Keep Your Night Vision Whilst Motoring At Night.
Available In An Assortment Of Colours.
Please Don’t Hesitate To Ask If you Have Any Questions.
🇬🇧 UK MADE 🇬🇧