Universal Marine Instrument Panel
This is a standard universal marine control panel.
This aftermarket panel has been made to connect directly to your original wiring loom or engine wiring harness.
The panel will work with all your original equipment engine sensors and is a simple case of wiring up the correct wires to the terminal block located on the tail of the instrument panel
Panel Specification:
Fascia;
Rustproof.
Does not fade.
Easy to clean.
Gauges;
Voltmeter.
Tachometer with hours.
Fully waterproof.
Stainless Steel bezel
Will not yellow or crack in the sun.
Warning Lights;
Low oil pressure with buzzer.
High water temperature with buzzer.
Alternator charge light.
Switches;
Waterproof Key switch: STOP, ON, HEAT, START.
Fitting:
Simply remove the old panel and plug in the new panel.
Secure the panel to the bulkhead with the fixing screws.
(If outside) Use gasket provided or gasket sealant between the panel and the bulkhead.
What you get in the box:
1.) - 1 x Standard universal instrument panel.
2.) - 1 x Gasket.
3.) - 4 x Fixing screws.
4.) - 2 x Keys with Float.
5.) - Manuals for Tachometer and Voltmeter.
6.) - Thank you note.
7.) - Customer service helpline contact information.
Designed to replace all instrument panels with, or without a key switch.
