Carbon Fibre Deluxe Volvo Penta Panel Kit
This is a Volvo Penta Deluxe control panel with a carbon fibre fascia.
The wiring and loom has been created with tinned wire and IP68 switches and components, ensuring maximum durability and no maintenance required during your travels.
This aftermarket panel has been made to connect directly to your original Volvo Penta wiring loom or Volvo Penta engine wiring harness.
The panel upgrades your existing setup to allow you to monitor water temperature and oil pressure readings in real time via dual pole VDO sensors.
Panel Specifications:
Fascia;
180 x 140mm.
Rustproof.
Does not fade.
Easy to clean.
Gauges;
Voltmeter.
4000 rpm Tachometer with hours.
Fully waterproof.
Stainless Steel bezel.
Will not yellow or crack in the sun.
3 - in - 1 gauge (Voltmeter / Oil pressure gauge / water temperature).
Warning Lights;
Low oil pressure with buzzer.
High water temperature with buzzer.
Alternator charge light.
Switches;
Waterproof push to start push button.
Backlit On / Off bush button.
Fitting:
- Simply unscrew your old sensors and replace with the new VDO sensors, hook up the wiring to the new poles one the sensors, secure and cable tie any loose wires.
- Remove the old panel and plug in the new panel.
- Secure the panel to the bulkhead with the fixing screws.
- (If outside) Use gasket provided or gasket sealant between the panel and the bulkhead.
What you get in the box:
1.) - 1 x Carbon Fibre Deluxe Instrument Panel.
2.) - 1 x Gasket.
3.) - 4 x Fixing screws.
4.) - 2 x Dual pole VDO sensors (Water temperature + Oil Pressure)
5.) - Manuals for Tachometer and Voltmeter.
6.) - Thank you note.
7.) - Customer service helpline contact information.
Designed to replace all Volvo Penta Panels with, or without a key switch.
If you have any questions please contact us.
