Navpod mounted instrument panel
This is a brand new - unused - in original packaging Navpod GP130 with all origional fixings, instructions and tool.
Into this we have mounted a Multi-Gauge and Flush mounted switch panel. All componants used are fully waterproof from any direction except sinking.
Multi-gauge options:
GPS unit. Full colour display giving you COG, Trip duration, ODO meter, Hours run meter, Fuel, RPM, Water temp, Oil Pressure, Volts 0 to 30V. The GPS unit is supplied as part of the package.
NMEA 2000 unit. The NMEA 2000 unit has RPM, Water temp, Oil Pressure, Fuel, Volt 9 - 32V, Engine running hours. As you would expect from a NMEA device there is just a single cable (1 Mtr) with male fitting to plug stright into your backbone.
Traditional unit. The traditional unit has all the same features of the NMEA 2000 device RPM, Water temp, Oil Pressure, Fuel, Volt 9 - 32V, Engine running hours. However this device uses a tradional wiring loom as does the GPS unit. This unit will accept input from compatable Disel , Gas and Outboard engines.
The switch panel has been sunk-into / flush mounted into the Navpod and is bonded into the unit. The switches that we use have rubber gators, stainless steel nut and a rubber seal underneath. The USB is bonded into the Navpod and has a very tight external seal, the internal USB is sealed from the external.
You can have any text that you need for the switches that and the switch type will be arranged with you after the purchase.
The internal connections are all done for you and each unit is supplied with a 3 meter harness / dropcable. This can be extended on arrangement after purchase.
Normal NAVPOD mounting systems are used to mount the pod onto your craft.