Dragon Marine Systems wiring diagrams
These wiring diagrams are here for Dragon Marine Systems customers and are copyright of the company.
11 way plug wiring diagram. On the origional supplied with your panel the functions of the custom panel key switch will be written in for you. This is the full diagram your panel may not be fitted with all these functions.
8 way plug wiring diagram. This is the diagram for our basic tacho panel when fitted with the 8 way plug
This is the engine side wiring diagram for Dragon Marine Systems panels. Not all of our systems have the STOP, PREHEAT or FUEL pump installations as not all engines require these. If you have beeen supplied with the engine wiring harness you will need to source/fit the connections from the 87/breaker pins from the relays.
Ignition switch pin outs.
17 there are two 30A spade outputs when switch is in'START' position 50a 5A spade outputs when switch is in'START' position 30 two 30A inputs FEED from Battery 15/54 two 15A outputs when switch is in'ON' position. 19 two 5A output when key is in 'HEAT' position 58 5A output when key in stop position. Key must be moved to 'OFF' and removed. |